Arduino Pepper Alarm System

Table of contents

• General info
• Required
• Instructions

General info

This is a code for a basic pepper spray alarm system

Required:

• Arduino, can be baught at this link: https://store.arduino.cc/ 5V output needed to activate 5V relay
• Arduino IDE, download at this link: https://www.arduino.cc/en/Main/Software
• 5V relays X2
• Pepper spray
• Motor to depress pepper spray lever
• Siren
• 12V battery
• LED’s(Red, Green)
• 220 ohm resistor X2(for LED’s)

Instructions:

Clone repository:

git clone https://github.com/potgieterbt/Arduino_Pepper_alarm_system.git

Open code in Arduino IDE:

• Right click > open with … > Arduino IDE

Upload code to Arduino:

• ctrl + u

If there are errors:

• make sure your Arduino is connected
• make sure you’re using the right COM port #

  • Tools > Port > “Port in use”

• Select Correct board

  • Tools > Board: > “You Arduino model”