python>> Fang>> 返回
项目作者： SdBU034

项目描述 ：
Using scrapy to crawl datas from fang.com.
高级语言： Python
项目地址: git://github.com/SdBU034/Fang.git
创建时间： 2020-04-14T13:59:08Z
项目社区：https://github.com/SdBU034/Fang
开源协议：
下载


Scrapy X fang.com

At first,You need to do the following:

  • Ensure you have installed python3 and scrapy and some needed packages such as pymysql in your computer.
  • You should be familiar to Python.
  • You have installed git and can use it correctly.

Then,execute following command in terminal to clone this repository to your computer.

  1. git clone https://github.com/SdBU034/Fang.git

At this time,you can use cd Fang in terminal to enter the path of this project.

Then,execute following command in terminal to run the spider.

  1. scrapy crawl fang

  1. In this command line,crawl means to start-up this spider,and fang is the spider’s name.which is the unique identification of one spider.

    alt name

  2. If it works correctly, you can see the datas which we want to get will appear fastly.If you just run it for testing,you can use Ctrl +C to interrupt it.

I’ll submit the introduction about this project again in a while.

My Profle is here == >SdBU034.

Welcome to visit,Thanks a lot.

Good Luck!