ht16k33-spin

This is a P8X32A/Propeller driver object for the Holtek HT16K33 LED Matrix/Segment IC (I2C).

IMPORTANT: This software is meant to be used with the spin-standard-library (P8X32A) or p2-spin-standard-library (P2X8C4M64P). Please install the applicable library first before attempting to use this code, otherwise you will be missing several files required to build the project.

Salient Features

• I2C connection at up to 400kHz
• Set display brightness, blinking
• Multiple address support
• Supports Adafruit variant of the 8x8 matrix
• Supports Adafruit 14-segment backpack 14-segment displays

Requirements

P1/SPIN1:

• spin-standard-library
• P1/SPIN1: 1 extra core/cog for the PASM I2C engine
• graphics.common.spinh library (only required for matrix driver; provided by spin-standard-library)
• terminal.common.spinh (required for both matrix and 14-seg drivers; provided by spin-standard-library)

P2/SPIN2:

• p2-spin-standard-library
• graphics.common.spin2h library (only required for matrix driver; provided by p2-spin-standard-library)
• terminal.common.spin2h (required for both matrix and 14-seg drivers; provided by p2-spin-standard-library)

Compiler Compatibility

(other versions or toolchains not listed are not supported, and may or may not work)

Hardware compatibility

• Tested using Adafruit 8x8 LED matrix
• Tested using Adafruit 14-segment LED

Limitations

• Very early in development - may malfunction or outright fail to build
• Matrix driver written using Adafruit 8x8 backpack for development - pixel layout may differ from other brands or models
• 14-seg driver written using Adafruit 14-seg backpack for development - segment layout may differ from other brands or models
• Doesn’t support 16 pixel-wide displays (planned)