hid-pd-external

An USB HID external for PureData (PD)

Note the current version only outputs raw values as received from the HID -
HID descriptor input item specifics (such as min/max, units, exponentials, etc)
are not respected. This is not yet implemented in the underlaying USB-HID-Report-Parser.

Built and tested on macos 10.15.7.
Tested RPi 4 (5.10.17-v7l+), in principle works but is suboptimal.

hid-example.pd

Todos

Add output report support
Feature reports?
Use hidraw instead of libusb (see note under linux)

Binaries

See https://github.com/tschiemer/hid-pd-external/releases

Building

macos

Install dependencies:

brew install libusb hidapi

Compile:

git clone --recursive https://github.com/tschiemer/hid-pd-external
cd hid-pd-external/
make -f Makefile.macos && make -f Makefile.macos install

linux (Raspberry Pi)

NOTE as it is, using libusb (in this external) on linux is somewhat invasive on USB devices as kernel
drivers might be detached for this to work. Using hidraw (as offered by hidapi) this seems to work without
further problem, but this is something that remains to be done.

Make sure to install required libraries:

sudo apt install libusb-1.0-0-dev libhidapi-dev

git clone --recursive https://github.com/tschiemer/hid-pd-external
cd hid-pd-external/
make -f Makefile.linux
sudo make -f Makefile.linux install

NOTE Your user will have to get direct access to HID devices, if you know which device it is, you can do something like

sudo chmod 777 /dev/bus/usb/001/003

In principle you could set up udev to do this for you (but didn’t work for me).

`hid` object interface

list [vendorid <vendor-id>] [productid <product-id>] [serial <serial-str>] [usage_page <usage-page>] [usage <usage>]

Output any HID devices matching the given criteria in the form of:

device <usage-page> <usage> <vendor-id> <product-id> <serial-str> <manufacturer-str> <product-str>

If serial-str, manufacturer-str or product-str is not defined by the device will return a dash -.

open [vendorid <vendor-id>] [productid <product-id>] [serial <serial-str>] [usage_page <usage-page>] [usage <usage>]

Attempts to open first device matching given criteria for interaction.

Outputs opened message on success.

close

Closes previously opened device.

bang / poll <msec>

Output/process incoming reports and output changed values in the form of

value <usage-page> <usage> <value>

If polling (<msec> > 0) is enabled banging is not possible, to disable polling set <msec> equal zero.

License

GNU General Public License v3

Author Philip Tschiemer, https://github.com/tschiemer

Relies on (also see deps):