模型可视化>> AX-02>> 返回
项目作者： AxMod3DPrint

项目描述 ：
AX-02 Delta 3D Printer
高级语言：
项目地址: git://github.com/AxMod3DPrint/AX-02.git
创建时间： 2017-01-15T14:37:37Z
项目社区：https://github.com/AxMod3DPrint/AX-02
开源协议：Other
下载


AX-02 Delta 3D Printer

This is a ground up design of a Delta Kinematic based 3D Printer. The ethos of this printer is to keep costs as low as possible but have a rock solid frame as a base with a large print area.

Usable print area is 300mm diameter with a Z Height of around 200mm. The printer is Smoothieware based using the Azteeg X5 mini by Panucatt Devices, 24 volt electronics with a 230v heated bed










© AxMod 3D Print 2017.

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the
CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed
WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF
MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A
PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable
conditions