Bus Blaster Sandwich Case
This is a sandwich-style case for the Bus Blaster v4.1a
intended to be cut with a laser cutter using 2mm acrylic
glass sheets.
The case consists of 2 layers below the PCB and 4 layers
above the PCB, that are hold together with four M3 screws
(ca. 15mm length) and a (domed cap) nut. You should cut
the following colors for the individual layers (gray line
is the PCB edge and only provided for reference):
Layer 0 (bottom):
Layer 1 (below PCB):
Layer 2 (above PCB):
Layer 3:
Layer 4:
Layer 5: