项目作者： Kamoba
项目描述 ：
Convert image to gcode
高级语言： Python
项目地址: git://github.com/Kamoba/imageToGcode.git
#
#
Hand writing to G-code
#
#
REQUIREMENTS:
Python 3
opencv-python
RasterCarve
imutils
numpy
scipy
Introduction:
This small tool allows you to convert an image into gcode.
For an optimal conversion use a black writing on a sheet of paper, and the photo must have a good brightness and without borders.
GETTING STARTED:
- Go to the project folder and run the following command:
pip3 install -r requirements.txt
- Run:
python imageToGcode.py test/very-bad-photo.jpg
You can quickly visualize the gcode file thanks to free online services such as:
For the stl: https://openjscad.org
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see http://www.gnu.org/licenses/.
