Install RPI system && Our project

Overall Setup:

Install Raspbian OS
Firstly you should download the image of the raspbian OS from Raspberry webpage
If you use windows system you should download Win32 Disk Imager to burn the image into the SD card.
Connect RPI to monitor via HDMI cable and enable all ports and interfaces

You should enable the interface of the RPI

sudo raspi-config

you will see the settings in blew remember to open Serial and SPI interface for this project.

" class="reference-link">

Network settings

Since you need to connect wifi in NTU ,RPI use Linux system but our school wifi(NTUSECURE) is WPA2 Enterprise which inner authentication is MSCHAPv2 powered by microsoft. So we can not connect to our school wifi with just simple click so what we should to is to go to the config folfer cd /etc/NetworkManager/system-connections and modify the config file sudo vim NTUSCURE add this line to it and save.Connect to wifi again.

[wifi]
hidden=true
mac-address=40:E2:30:0D:6A:CB
mac-address-blacklist=
mac-address-randomization=0
mode=infrastructure
seen-bssids=
ssid=NTUSECURE
system-ca-certs=false
[wifi-security]
group=
key-mgmt=wpa-eap
pairwise=
proto=
[802-1x]
altsubject-matches=
eap=peap;
identity=student\\CXIONG001
password-flags=1
phase2-altsubject-matches=
phase2-auth=mschapv2

Use Putty.exe(serial speed: 115200) and connect RPI to Windows via USB-TTL serialcable(Optional)

USB-TTL serial cable PIN configuration:

Red-VCC BLACK-GND WHITE-TX GREEN-RX

RPI Environment Setup for OBD-LED Matrix(python): https://github.com/Pbartek/pyobd-pi

RPI Environment Setup for OBD-Webserver(nodejs):

Install NodeJs via NPM:

curl -sL https://deb.nodesource.com/setup_7.x | sudo -E bash –

sudo apt-get install -y nodejs

Install npm serialport

sudo npm install serialport --unsafe-perm --build-from-source

Download source code from github:

git clone https://github.com/xiongchenyu6/Dip_Project_for_OBD.git

Max7219 Config:

cd Dip_Project_for_OBD/
cd max7219/
sudo python setup.py install

Webserver Config:

cd~
cd Dip_Project_for_OBD/
cd mapServer/
npm install

Gulp Config:

sudo npm install --global gulp-cli

To start the webserver, enter(within “mapserver” folder): gulp

To start the LED Matrix, run “Dip_Project_for_OBD/pyobd-pi/obd_recorder.py”