L.A.C.C

Laser-cut ATX Computer Case

This is a full sized ATX computer case you can laser cut (and probably cut using a CNC but I don’t have one of those)

It should fit any ATX compliant motherboard, but I’ve only tried the one motherboard I have.

It has space for 3x 3.5” hard drives and a 2.5” hard drive, which are held by seperate 3d printed modules.

The entire design was done in Fusion 360. You can view it / download it here or use the LACC.f3z file attached.

more photos

Materials

Case

• 5x sheets of 24” x 12” sheet of 1/8” or 3mm acrylic or MDF
• 26x M3 nuts
• 20x M3x16 screws (for holding case together)
• 6x M3x12 standoffs (for motherboard)
• 6x M3x4 screws (for standoffs)
• 2x 120mm Computer Fan
• 4x 6-32 screws for ATX power supply

Hard Drive Bays

• 2x of the 3.5” drive holder parts
• 2x of the 2.5” drive holder parts
• 6x M3x10 screws
• 6x M3 nuts

Models Used

• Accurate Blank Motherboard & PCIe Card Models by subtec
• 120mm PC Case Fan by
  Ollie Keattch
• Power supply (mine)
• Hard Drive 2.5” and 3.5” (mine)

License

Creative Commons Attribution-ShareAlike 4.0 International

You are free to use, sell and remix freely as long as any modifications you make are also shared under this same license