What:
Guide for the blade in a delta or delta like 14 inch bandsaw.

Status:
some problems, but works for me with smaller than cool blocks

Sample Image:

Documentation:
Some, this file, a bit in the wiki, and of course look at the files especially the *.FCStd

    Standard Disclaimer:
        If you have more than a casual interest in this project you should contact me and
        see if the repository is actually in good shape.  I may well have improved software
        and or documentation.  I will try to answer all questions and perhaps even clean up
        what already exists.

• Documentation of the Model Tree: see the wiki

• Workflow for model modification: see the wiki

———- stl i have used so far ———
guide_v1.stl

print at 30% to get ideas on dim and printing
orientation 
printed in operating position with support
took something over an hour
  result:
    stem just fit with just a bit of filing
    cool block did not fit even with filing ( should file )
    fitted in 1/4 inch bolts with tap, did not try to fit nuts
        check nut dim against knob tutorial
    did fit reduced block of epay and saw works reasonably well with this
    seems sturdy enough id not too much so.
Next:
    check on nut size
    have some un constrained sketch fix
    resize the cool block and test print first

————————— environment —————————-

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15959 (Git)
Build type: Release
Branch: master
Hash: 397418078a6f61e8c39cedfe1160adc2abd73510
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: English/UnitedStates (en_US)